Shopping tips 10 minutes into the induction cooker

2022-07-22
  • Detail

If the salesperson's sales skills no longer confuse you, then spend a few minutes mastering some simple discrimination methods  you can choose a practical induction cooker. First, check whether the panel is flat, concave convex or inclined, and choose a smooth and nondestructive one; Looking at the color of the panel, the black German Celan glass-ceramic panel and the Japanese neg ceramic panel with smooth and pure white surface are good panels, which are generally used by famous and large manufacturers; Although domestic grade A and B boards are also white

if the salesperson's sales skills no longer confuse you, then spend a few minutes mastering some simple discrimination methods  you can choose a practical induction cooker

first, check whether the panel is flat  whether there is bump or inclination, and choose a smooth and nondestructive one; Looking at the color of the panel, the black German Celan glass-ceramic panel and the Japanese neg ceramic panel with smooth and pure white surface are good panels, which are generally used by famous and large manufacturers; Although domestic grade A and B boards are also white, the edges of grade B boards are rough and not as smooth as grade a boards; Grade C board is prone to yellowing and discoloration, and manufacturers often print patterns. Try to choose imported panel or domestic A-level panel products

then check the cooling fan at the bottom and select the product with large diagonal size of the fan. It is best to use magnetic levitation, hydraulic or nano ceramic fan. If it can be disassembled, press the fan blade by hand. If it can be pressed down by about 2mm, it is magnetic levitation, otherwise it is not. Ask the shopping guide if you can confirm the type and brand of cooling fans. For example, if you use AVC and other large international manufacturers, it shows that the manufacturer is very willing to invest the cost. The heat dissipation efficiency will affect the service life of internal components, and a good heat dissipation fan will reduce the noise during normal operation

look at the power plug again, you should choose the product of three pin power plug. Then enter the product test. The product test is divided into five steps:

first, listen to the sound

turn on the power and start the machine. Except for the normal sound of the cooling fan, you should not hear any other noise and current sound

second, test the keys

test whether all the key functions can operate normally one by one, and eliminate the products with key failure

III. test safety

● no pot protection

move the pot under the working state and observe whether the induction cooker can automatically alarm. Usually, the power supply will be automatically cut off in about 2 minutes. For example, Taiwan's Zhengfu induction cooker, the cooker will start to alarm and stop heating within 3 seconds after leaving the induction cooker, and will automatically shut down after 90 seconds

● empty pot protection

if the heating time of the empty pot is slightly longer, the induction cooker will automatically send an alarm and stop heating. Some induction cookers do not have this function

● improper heating protection

try placing small items such as iron spoons on the surface of the stove and then start the machine. Generally, when the area of the cooker is less than 65%, it cannot be heated normally. For example, the induction cooker will automatically alarm when heating small objects and shut down automatically after 90 seconds. Some induction cookers do not have this function

IV. test the adaptability of the pot

during the power on heating process, repeat the actions of taking and putting the pot several times to see whether the time to restore the heating is normal. Usually, the heating will be restored after putting the pot back for 1-3 seconds. If the recovery time is greater than 5 seconds, it indicates that this machine has poor adaptability to the pot

v. test the temperature control

check whether the induction cooker has a design of 100 ℃ temperature zone, boil water with the supporting pot, and see whether the boiling state can be maintained when the water is set at 100 ℃ after boiling. Inaccurate temperature design will lead to hidden dangers of burning, because many internal protection functions are based on temperature monitoring. In the process of boiling water, move the pot to the edge by 1/4 or 1/3, and keep it for about 1-2 minutes. It should be able to continue heating, indicating that the heating function of the induction cooker is normal. When selecting, try to choose the one with more temperature adjustment gears. It will be more convenient to use if the temperature can be increased by 10 or 20 between 100 ℃ and 270 ℃

follow the above steps to purchase and test. I believe you can become an expert in purchasing induction cooker in 10 minutes

广州精神心理医院

惠州男科医院

北京妇科医院

南京性病医院

Copyright © 2011 JIN SHI